Using a Screen as a Charger
This article will provide the steps to temporarily convert your screen to use as a charger / check in station
- Ensure the "Enable client-charger switch" is enabled under the "Charger" tab in the "Server Configuration" page. Save Changes and Send Configuration Update
![](https://support.pourmybeer.com/hubfs/image-png-Oct-16-2021-01-32-50-47-AM.png)
- Log in to the desired screen as admin or with an admin card.
- Scroll to the bottom and select "Switch to Charger"
![](https://support.pourmybeer.com/hubfs/image-png-Oct-13-2021-09-06-44-04-PM.png)
- Select "Press to start" on the next screen, it will now reboot in Charger mode.
- To revert back to a screen, log in to the screen as admin or with an admin card again.
- Scroll to the bottom and select "Switch back to TTG Client"
![](https://support.pourmybeer.com/hubfs/image-png-Oct-13-2021-09-09-41-55-PM.png)
- Select "Press to start" on the next screen, it will now reboot back to a normal screen.