Draft Design
      Back to home
      1. Help Center
      2. Pre Install
      3. Draft Design

      Installation of Smart FOBs

      Installation of Smart FOB’s

      FOBS (Foam on Beer) stop the flow of beer to a tap when the keg kicks. This prevents the beer line from filling with foam and/or spraying all over the person pouring. FOBS help reduce waste and maximize profits by always keeping the beer line full. 



      PourMyBeer supports “Smart Fobs” that transmit a signal to the screen notifying the user that the Keg has been kicked. Mechanically, Smart Fobs install just like any other beer Fob. Each Fob will have a blue 22AWG (neutral) and a brown 22AWG (power) wire. They are wired into the back of the control board on the TTG as shown. Each control board will support up to 4 taps.