Calibration of the Soda Machine

Step 1:  Place your Admin Card on the Screen

Step 2:  Select "Configure Binary Inputs"

Step 3:  Select the line you wish to configure

Step 4:  Slide the toggle button labeled with the number "2" in the photo 

Step 5:  Place a measuring cup under the faucet and press the button dispense bar on the soda machine and pour one oz.  Take note of the value that is populated in box "1" in the picture.  

Step 6:  Slide the toggle back off and enter the value that you previously recorded.

Step 7:  Repeat for the remaining 7 lines.